Equipment Listings

EDM2000 MULTI PURPOSE MACHINE WITH ON BOARD SULLAIR COMPRESSOR
TRUCK OR TRACK MOUNT CONFIGURATION

Exploration Drill Masters announces the release of the newly developed all terrain EDM 2000 dual purpose exploration drill.

The EDM 2000 is a heavy duty drill rig which can be mounted on self propelled crawler tracks or mounted on 8 x 8 / 8 x 4 truck. The EDM 2000 is versatile simple to operate and maintain, and borrows many characteristics of a broad range of drill rigs on the market today which have never before been offered in one stand alone drill.

Diesel Engine

• DDC/MTU 12V-2000TA
• 760hp @ 1,800 rpm
• 900hp Optional
• Vee pack cooler pack 55 degree ambient (Allied Heat Australia)

Sullair Compressor with Airdrill Clutch

• 1150/500 or 1350 combo option

Rotation Head Top Head Drive With Floating Spindle

• Two speed top head drive with splined floating spindle
• Low / high manual gear change
• 5 – 150 rpm low gear, 150 – 1500 rpm high gear

Torque and rpm ratings top head drive two speed gear box

• Hollow spindle ID: 70mm with 3-1/2” API IF pin thread
• High gear maximum displacement of 250cc 1,179 ft lbf / 1,598 Nm
• High gear minimum displacement of 180cc 754 ft lbf / 1,023 Nm
• Low gear maximum displacement of 250cc 7,737 ft lbf / 10,490 Nm
• Low gear minimum displacement of 180cc 4,952 ft lbf / 6,713 Nm

Telescopic Drill Mast

• Heavy duty two piece tubular section mast structure
• Capable of angles from vertical to 45⁰
• 2000mm mast dump

Standard hydraulic mast raise cylinders with counter balance valves installed as standard for safety

Head Traverse

• Driven by one hydraulic cylinder through heavy duty 2:1 rope system
• Maximum speed up 830mm/sec
• Maximum speed down 622mm/sec
• Side racking rotation head to L/H side
• 7.6m Stroke with rotation head

Pull Down

• (17,500lb)

Pull Out

• (55,000lb)

Main Hoist, mounted on top of telescopic mast section (Type Braden)

• Maximum speed 75m/minute minimum displacement of motor = 20,000 lbf
• Maximum speed 37.5m/minute maximum displacement of motor = 40,000 lbf
  • Failsafe brake mechanism (spring applied, hydraulic release)
  • 9 metre pull for diamond pipe and casing
  • Two speed selected from control panel

Jib Boom

• Actuated by hydraulic cylinder for raise / lower.
• Actuated by hydraulic cylinder for left / right
• Independent winch with lifting capacity of 200kg

Water Pump

• FMC (Bean) W1122BCD
• 140 l/minute @ 7,000 kpa
• Powered from the rig hydraulic system

Rod Break Out

• 48” Adjustable stilson wrench hydraulic cylinder mounted for hydraulic breakout capability.
• Diaspan wrap spanners to suit N, H, P Series pipe

Dual Rod Breaker (Type Airdrill)

• Adjustable torque control
• Various sizes & options available

Jack Legs

• Heavy duty cylinders with pilot check valves
• Extra large pads for better ground stability

Rod Clamps & Slips Table (Type UDR)

• Hydraulically operated, self energising rod clamp
• Easy to remove jaws
• Common jaws from  B, N, H, P, PW series

Wire line Winch Mounted on mast pivot plate (type EDM)

• Capacity of 2200m of 8mm wire rope
• Maximum average pull from full to empty drum 3,680 Ibs
• Maximum average speed from full to empty drum 7m/sec
• Automatic rope tracking devise

Control Panel

• Two meter Extendable control panel for better vision whilst angle drilling.
• Easy self explanatory layout
• Easy access for basic maintenance and repairs
• Fully sealed control panel with all electrical instrumentation.

Tilting Rod Bin

• Capacity of 32 x 4-1/2” RC pipe

Drill Star Swivel Kit & 1200cfm Cyclone Assembly

• Two in one swivel assembly with blow down / blow back.

KL Style Rod Handler

• Pilot controled

Mud Mixing Circuit

• 60 lpm pump independent from all other functions, with flow control, and quick release connectors

Hydraulics

• Danfoss pumps & motors, Parker main valves, Danfoss PVG32 auxiliary valves, Sun cartridges.

Tracks

• Strickland heavy duty 40,000kg capacity two speed
• Grousers width 500mm
• Maximum travel speed high gear 3.5 kph
• Maximum travel speed low gear 1.7 kph
• Track idler to drive sprocket centres 4200mm

Rod Spin Guard

• Cages off the rotating rods from the operator
• Hydraulically interlocked with rotation
• Reduces rotation speed to 150 rpm when cage is opened

Theoretical Rated Depth Capacities Diamond Coring Q Series Pipe

• B - 2800m
• N - 2000n

• H - 1500m
• P - 1100m

• 4” dual wall RC pipe – 550m
• 4-1/2” dual wall RC pipe – 450m

Dimensions

• Track Width 3000mm
• Truck mount width 2500mm
• Platform Width for track configuration 2500mm
• Jack leg centres 7,000mm
• Mast Length Extended 14,300mm
• Mast Length collapsed for travelling position 12,300mm
• Overall Height 4,300mm

Safety Features

• Guards on all rotating equipment
• Anti slip grid mesh on all work platforms
• Hand rails on all work platforms
• Emergency stops in control cabinet and on both sides of machine
• Rod spin guard with hydraulic interlock. Reduces rotation to 100 rpm when opened.
• Heat guards on all exhaust manifolds and piping
• Murphy shut down system which protects the following

Low engine oil pressure

High engine temperature

Low hydraulic tank oil level

Hydraulic boost pressure (When fitted)

• 24 volt, 100amp alternator to enable high quality additional work lights
• Two certified 10kg fire extinguishers

Standard Features

• Easy accessible control panel for general maintenance
• Storage tray with sealed hinged lid mounted on front bottom of control panel
• Clear easy to read and self explanatory controls
• Warning horn to alert drill crew
• Central grease point station which covers all grease nipple points
• Easy accessible oil drain station for engine, hydraulic tank, FMC pump
• Remote mounted oil and fuel filter station
• Fully sealed electrical panel
• Hydraulic test points on all pumps, motors, and spool banks
• Common pressure test centre located inside the control panel which allows every individual hydraulic component to be tested.
• Sealed pocket located inside the control panel door for all maintenance records, operations & parts manuals
• Additional work light plug outlet station
• Lockable diesel tank fill points
• Lockable engine ignition with Caterpillar type heavy duty ignition key
• Battery isolation switch
• Fuel tank gauge
• Clearly labelled oil type and grades on all oil fill points
• Level bubbles mounted on platform and mast
• Tool box with all standard tools that are generally required for basic maintenance and servicing
• Two additional available spool banks, one with detent, one spring centre for additional mud mixing systems, casing jacks, etc
• Rig wash down gun, and hose which connects directly to water injection pump
• All jaw sets from BQ, NQ, HQ, PQ.
• Stilson wrench for hydraulic break out, 48’’ inch
• 10m of 2 inch suction hose with foot valve and cam lock connectors
• First 250 and 500 hr service kit
• Flashing light, and standard mine site lighting
• Mast ladder
• Rig platform access ladders and steps
• Large fully adjustable offsiders platform
• EDM products are designed with standard imperial materials. All threads are either UNC or UNF. All hydraulic valves bodies, pumps, motors use common SAE O-ring boss adaptors

Warranty

12 Months / 3000 hrs

Optional Features

• Reverse circulation kit
• Automatic running blowdown system
• KWL Rod loader for RC pipe only

• Additional sealed lockable Tool Box
• Additional work lights
• Hydraulic boost kit for high altitudes ( Prevents hydraulic pump cavitation )
• Fully silenced, and enclosed deck for quite and cleaner machine
• 6 inch tradesmen vice
• Gas bottle mounts
• Hydraulic welder and generator package
• 1500 hr service kit
• Remote spare parts kit
• Clients colour choice
• Fire suppression unit
• Silenced engine package
• Enclosed operators cabin
• Chuck type rod spinner
• Extendable front jack legs for removing truck or crawler carrier.
• FMC L16-18SC Disc 65gpm & 1500psi high pressure water pump
  
  Contact Russell Neilson This e-mail address is being protected from spambots. You need JavaScript enabled to view it or Mobile 0433 131 662

PHOTO BELOW OF EDM2000 TRACK MOUNT MULTI PURPOSE